CEMEDINE CA-186 High-Super 5 Epoxy Adhesive is a fast-curing, two-component bonding system designed for strong and durable repairs on metal, ceramic, and compatible rigid plastic materials. Supplied as an 80g resin-and-hardener set, this versatile epoxy adhesive provides a convenient solution for model making, fishing equipment, household repairs, metal components, craft projects, and general assembly work. Its five-minute working time helps users complete bonding tasks efficiently while maintaining dependable adhesion and a hard cured finish.

Table of Contents

CEMEDINE CA-186 High-Super 5 Epoxy Adhesive for Fast Repairs

CEMEDINE CA-186 uses a reactive epoxy resin and polyamide hardener system. Equal amounts of Part A and Part B are mixed immediately before application. Once combined, the adhesive begins curing quickly at room temperature, making it suitable for projects where long waiting periods are undesirable.

The mixed adhesive has a working life of approximately five minutes at 23°C. Effective curing can typically be achieved in about one hour, while the standard full-curing condition is approximately 24 hours at 23°C. Actual curing speed may vary depending on ambient temperature, adhesive quantity, joint thickness, and substrate conditions.

Unlike single-component adhesives that depend on air or moisture exposure, the two-part epoxy system cures through a chemical reaction between the resin and hardener. This allows the material between closely fitted surfaces to cure reliably and form a rigid, durable bond.

Key Benefits of CEMEDINE CA-186 High-Super 5 Epoxy Adhesive

CEMEDINE CA-186 High-Super 5 Epoxy Adhesive combines rapid processing with strong mechanical performance. Its solventless formulation produces minimal curing shrinkage and helps create a stable adhesive layer between properly prepared surfaces.

Fast five-minute working time for efficient repairs and assembly
Two-component epoxy formulation with a simple 1:1 mixing ratio
Strong adhesion to metal, ceramic, and compatible rigid plastics
Excellent resistance to heat, water, and many chemicals
Hard cured finish for rigid components and structural repairs
Good gap-filling capability for slightly uneven surfaces
Convenient 80g set for workshops, maintenance, and craft projects

The cured adhesive provides a typical tensile shear strength of approximately 18 MPa under the manufacturer’s test conditions. It also reaches a typical Shore D hardness of 77, creating a firm bond suitable for rigid substrates. Final performance depends on surface preparation, joint design, adhesive thickness, curing conditions, and the materials being bonded.

Applications of CEMEDINE CA-186 High-Super 5 Epoxy Adhesive

CEMEDINE CA-186 High-Super 5 Epoxy Adhesive is recommended for model construction, metal model repairs, fishing equipment, household maintenance, handicrafts, and bonding small rigid components. It can be used on steel, aluminum, ceramic, pottery, and compatible hard plastic surfaces after appropriate preparation and testing.

Typical applications include repairing broken ceramic items, attaching metal brackets, assembling decorative components, fixing rigid plastic housings, bonding fishing accessories, and constructing scale models. Its short working time makes it especially useful for small components that can be positioned and secured quickly.

This product is not recommended for polyethylene, polypropylene, nylon, soft PVC, fluoropolymer, or rubber materials. It should also not be used on food-contact areas, valuable jewelry, living-animal containers, or applications with insufficient bonding surface area.

How to Use CEMEDINE CA-186 High-Super 5 Epoxy Adhesive

Remove oil, rust, moisture, dust, and loose contamination from both bonding surfaces. Light abrasion may improve adhesion on smooth metal or rigid plastic. Dispense equal volumes of the resin and hardener onto a clean mixing surface.

Mix both components thoroughly with a spatula until the blue color disappears and the mixture becomes uniform. Apply the mixed adhesive immediately and evenly to the prepared surface. Assemble the parts within the five-minute working period and maintain correct alignment using tape, clamps, string, or another suitable fixture.

Keep the assembly stationary until sufficient handling strength has developed. Avoid loading, bending, washing, or heating the bonded parts during the initial curing stage. For critical applications, complete a small compatibility and performance test before full use.

Storage of CEMEDINE CA-186 High-Super 5 Epoxy Adhesive

Store the containers tightly closed in a cool location away from direct sunlight and excessive heat. Keep the resin and hardener caps separate to prevent accidental contamination. Always review the current product instructions and safety documentation before use.

CEMEDINE CA-186 High-Super 5 Epoxy Adhesive provides a practical combination of fast curing, high strength, convenient mixing, and reliable resistance for everyday repair and assembly applications involving rigid materials.

Explore our two-part epoxy adhesives for additional fast-curing and structural bonding products.

View the official CEMEDINE High-Super 5 product information for current specifications and application guidance.

Explore more two-part epoxy adhesives