Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
CEMEDINE CA-149 Two-Part Epoxy Adhesive for Metal Ceramic and Hard Plastic Repair
CEMEDINE CA-149 Two-Part Epoxy Adhesive for Durable Rigid Material Bonding
CEMEDINE CA-149 Two-Part Epoxy Adhesive is a dependable room-temperature curing adhesive designed for bonding metal, ceramics, and selected hard plastics in repair, assembly, and hobby applications. Supplied as a 110 g two-component set, it combines resin and hardener in equal volumes before use. After thorough mixing, the adhesive provides a practical working period and begins to harden after approximately 60 minutes at 23°C, giving users enough time to position larger or more detailed parts accurately.
The cured adhesive forms a hard bond with useful resistance to heat, water, and many chemicals. These properties make CEMEDINE CA-149 Two-Part Epoxy Adhesive suitable for applications where ordinary household glue may not provide sufficient durability. It is especially useful for bonding rigid materials and for covering comparatively wide bonding areas. The formula can support both everyday repair work and careful model assembly when the surfaces are properly prepared and the mixed adhesive is applied evenly.
Key Benefits of CEMEDINE CA-149 Two-Part Epoxy Adhesive
One of the main advantages of CEMEDINE CA-149 Two-Part Epoxy Adhesive is its broad compatibility with hard substrates. Recommended materials include metals, ceramics, and hard plastics. Typical uses include do-it-yourself repairs, plastic model construction, metal model repair, fishing tackle assembly, and general household maintenance. It can also be considered for rigid brackets, decorative parts, tools, fixtures, and non-flexing components that require a strong two-part adhesive.
This product is not recommended for polyethylene, polypropylene, nylon, soft PVC, fluoropolymer materials, rubber, or other flexible and low-surface-energy substrates. It should not be used for precious items, high-value products, areas that contact skin or food directly, or containers intended to hold living organisms. Large glass bonding applications also require caution because curing shrinkage may place stress on the glass.
How to Apply CEMEDINE CA-149 Two-Part Epoxy Adhesive
For reliable results, remove dust, rust, oil, moisture, and old adhesive from both bonding surfaces. Dry the parts completely before mixing. Dispense equal volumes of Part A and Part B onto a clean disposable surface, then mix thoroughly with a spatula until the material becomes uniform. Apply the freshly mixed epoxy evenly to the bonding area without delay.
Join the parts in the correct position and secure them with tape, clamps, string, or another suitable fixture. Keep the assembly still while the bond develops. Because curing performance depends on temperature, adhesive thickness, material type, and joint design, users should allow adequate time before loading or handling the bonded item. A trial application is recommended whenever appearance, strength, or material compatibility is critical.
Buying and Process Guidance for CEMEDINE CA-149 Two-Part Epoxy Adhesive
For e-commerce buyers, the 110 g set is a convenient format for workshop, maintenance, craft, and repair use. The two separate components remain stable before mixing, allowing the user to prepare only the amount required for each task. This can help reduce waste when several small repairs are completed over time.
For production or repeated assembly, users should standardize the mixing ratio, coating thickness, fixture method, and curing environment to improve consistency. Always test the product on the actual substrate, particularly when the plastic grade, surface coating, or service temperature is uncertain.
Storage and Safety of CEMEDINE CA-149 Two-Part Epoxy Adhesive
Use CEMEDINE CA-149 Two-Part Epoxy Adhesive in a well-ventilated area and keep it away from flames and heat sources. Avoid contact with eyes and skin, and follow the latest safety instructions provided by the manufacturer. After use, close the Part A and Part B containers carefully and avoid exchanging their caps. Store the product in a cool place away from direct sunlight and out of reach of children.
For customers seeking a versatile epoxy solution for rigid-material repair, CEMEDINE CA-149 Two-Part Epoxy Adhesive offers straightforward mixing, a manageable working period, and durable bonding performance. Explore our industrial epoxy adhesives for additional products suitable for metal, plastic, ceramic, and equipment assembly applications.
