Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
CEMEDINE 1500 Epoxy Adhesive for Metal Plastic Electronics and Precision Assembly
CEMEDINE 1500 Epoxy Adhesive for Standard Industrial Bonding
CEMEDINE 1500 Epoxy Adhesive is a two-component, room-temperature-curing adhesive designed for durable bonding, sealing, and assembly across many industrial materials. The system combines an epoxy resin base with a polyamide hardener and uses a simple 1:1 mixing ratio. Once mixed, it cures through a chemical reaction without relying on solvent evaporation, helping produce a strong bond line with limited shrinkage and no gas generation during the curing process.
Developed as a standard-grade industrial epoxy, CEMEDINE 1500 Epoxy Adhesive offers a practical balance of working time, strength, insulation performance, and application versatility. Its one-hour pot life gives operators enough time to mix, spread, position, and fixture components accurately. The adhesive can reach useful strength in approximately six hours, while the standard reference cure is 24 hours at 23°C. This process window makes it suitable for workshops, maintenance departments, and production lines that need dependable results without extremely rapid curing.
Key Benefits of CEMEDINE 1500 Epoxy Adhesive
CEMEDINE 1500 Epoxy Adhesive combines strong adhesion with durable cured properties. Official product data lists a typical tensile shear strength of 15.7 MPa, a Shore D hardness of 82, and a glass-transition temperature of approximately 54°C. The cured system also provides useful water resistance, chemical resistance, low creep under load, and excellent electrical insulation, supporting applications that require mechanical stability and protection around electrical or electronic components.
The base resin is light-yellow and transparent, while the hardener is light-brown and transparent. Typical viscosity values are approximately 20 Pa·s for the base and 55 Pa·s for the hardener at 23°C. These medium-viscosity characteristics support smooth spreading while helping the mixed material remain controlled on prepared surfaces. The formula is supplied in multiple industrial package sizes for both trial use and repeat manufacturing.
Applications for CEMEDINE 1500 Epoxy Adhesive
CEMEDINE 1500 Epoxy Adhesive is suitable for bonding and sealing electrical equipment, electronic parts, construction composite members, precision instruments, craft products, and other rigid industrial assemblies. Published performance data includes bonding results on steel, aluminum, copper, rigid PVC, polystyrene, acrylic, FRP, decorative board, and plywood. This broad material range makes the product useful for metal-to-metal, plastic-to-metal, and selected mixed-material joints.
Actual performance can vary according to substrate grade, surface coating, joint design, adhesive thickness, temperature, moisture, chemical exposure, and operating load. Polyethylene, polypropylene, fluoropolymers, and other low-surface-energy materials generally require a specialized adhesive or validated surface treatment. Representative tests should therefore be completed before mass production, safety-critical assembly, or long-term outdoor service.
How to Apply CEMEDINE 1500 Epoxy Adhesive
Before applying CEMEDINE 1500 Epoxy Adhesive, remove oil, grease, dust, rust, moisture, release agents, and loose contamination from both bonding surfaces. Measure equal quantities of the base resin and hardener, then mix thoroughly until the color and consistency are uniform. Prepare only the amount that can be applied within the available working time.
Spread the mixed adhesive evenly, join the components, and secure them using clamps, tape, weights, or a suitable fixture. Maintain correct alignment while the bond develops and avoid loading the assembly before adequate curing. For repeatable production, standardize surface preparation, mixing accuracy, bond-line thickness, application time, fixture pressure, temperature, and cure duration.
Storage and Safety of CEMEDINE 1500 Epoxy Adhesive
Store CEMEDINE 1500 Epoxy Adhesive in its original closed containers according to the current label and safety data sheet. Keep tools for the resin and hardener separate to prevent cross-contamination. Use suitable ventilation and personal protective equipment, and avoid skin and eye contact during mixing and application.
For buyers seeking a reliable standard epoxy for industrial bonding and sealing, CEMEDINE 1500 Epoxy Adhesive offers straightforward 1:1 mixing, useful working time, strong adhesion, electrical insulation, and broad substrate compatibility. It is a practical choice for electronics, construction composites, precision equipment, rigid components, repair work, and general manufacturing. Explore our industrial epoxy adhesives for additional professional bonding solutions.
