Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
LOCTITE SF 7655 Electrical Contact Cleaner for PCB and Sensitive Electronics
LOCTITE SF 7655 Electrical Contact Cleaner for Precision Cleaning
LOCTITE SF 7655 Electrical Contact Cleaner is a fast-evaporating, residue-free solvent cleaner developed for sensitive electronic and electrical equipment. Its specialized blend of petroleum distillates and alcohol effectively removes dirt, dust, fingerprints, and light oil contamination from electrical contacts without leaving a film that could interfere with equipment performance. The colorless, transparent cleaner is suitable for industrial maintenance, electronic assembly, inspection, troubleshooting, and repair operations requiring accurate and controlled cleaning.
Designed as a cost-effective precision-cleaning solution, LOCTITE SF 7655 Electrical Contact Cleaner can be sprayed directly onto difficult-to-reach areas. The aerosol application and optional extension tube help users target connectors, switches, terminals, circuit-board areas, and compact electrical components. Rapid evaporation minimizes equipment downtime and eliminates the need for water rinsing or extensive manual wiping in suitable applications.
Key Benefits of LOCTITE SF 7655 Electrical Contact Cleaner
LOCTITE SF 7655 Electrical Contact Cleaner provides efficient removal of common light contaminants from contacts, printed circuit boards, switches, and circuit breakers. By removing fingerprints, dust, and oily deposits, the cleaner helps restore a clean surface for inspection, electrical contact, maintenance, or subsequent bonding. Its residue-free performance reduces the risk of harmful deposits accumulating on sensitive equipment after cleaning.
Henkel lists a typical specific gravity of approximately 0.7 at 23°C, a surface tension of about 17.1 mN/m, and a Kauri-Butanol value of 29.5. The relatively low surface tension helps the liquid spread across small component surfaces and penetrate narrow spaces. Published testing also reports a dielectric breakdown strength of approximately 12.4 kV under the specified test method. These values are typical laboratory results and should not be treated as guaranteed specifications for every operating condition.
Material-compatibility testing in the technical data sheet showed no visible change on several commonly used plastics and elastomers, including ABS, neoprene, nitrile rubber, polypropylene, polyethylene, PET, PMMA, polycarbonate, PBT, and cured epoxy resin. Butyl rubber showed swelling and was identified as incompatible under the stated immersion test. Users should therefore test the cleaner on actual plastic grades, rubber seals, labels, coatings, inks, and decorative finishes before widespread application.
Applications for LOCTITE SF 7655 Electrical Contact Cleaner
LOCTITE SF 7655 Electrical Contact Cleaner is suitable for cleaning printed circuit boards, electrical contacts, relays, switches, circuit breakers, terminals, connectors, sensors, control panels, electronic modules, and other sensitive equipment. It may also be used to prepare compatible surfaces before adhesive bonding, provided the cleaner is allowed to evaporate completely so that solvent is not trapped inside the bond joint.
The product is intended primarily for light contamination. Heavy grease, thick adhesive residue, corrosion, carbonized deposits, or strongly oxidized material may require additional mechanical cleaning or another specialized maintenance product. Always confirm that the selected cleaning procedure is appropriate for the component and does not damage surrounding materials.
How to Use LOCTITE SF 7655 Electrical Contact Cleaner
Disconnect electrical power and allow hot components to cool before cleaning. Shake the aerosol can thoroughly and hold it approximately 15 to 20 cm from the target surface. Spray the contaminated area liberally, using the extension tube when precise application is required. Allow dissolved contamination and excess cleaner to drain away from the component.
Wait until the cleaner has fully evaporated before reconnecting power, testing the equipment, applying adhesive, or returning the assembly to service. Use additional applications for heavily soiled areas, but avoid excessive flooding of enclosed components where solvent could become trapped. For repeatable production cleaning, standardize spray distance, application time, drainage, evaporation time, and inspection criteria.
Safety and Storage of LOCTITE SF 7655 Electrical Contact Cleaner
LOCTITE SF 7655 Electrical Contact Cleaner is a flammable aerosol and must be kept away from sparks, flames, hot surfaces, and electrical equipment that is not properly protected. Use adequate ventilation and suitable personal protective equipment. The pressurized container should be protected from direct sunlight and temperatures above 50°C, and the latest safety data sheet must be reviewed before professional use.
For electronics manufacturers and maintenance teams, LOCTITE SF 7655 Electrical Contact Cleaner offers fast evaporation, targeted aerosol application, broad material compatibility, and residue-free cleaning for sensitive components. Explore our industrial electrical contact cleaners for additional PCB, contact, connector, switch, and control-equipment maintenance solutions.
