CEMEDINE CA-149 60 Minute Epoxy 110g is a two-component epoxy adhesive developed for rigid-material bonding applications where strong adhesion and a longer working period are required. The set contains equal amounts of Component A and Component B and is suitable for metal, ceramic, hard plastic and selected rigid-material repair and assembly applications.

Table of Contents

Product Overview

CEMEDINE Super CA-149 is a standard two-part epoxy adhesive designed to begin curing approximately 60 minutes after mixing at 23°C.

Compared with faster five-minute or thirty-minute epoxy systems, the longer working period gives operators more time for adhesive spreading, positioning and alignment before the material begins to harden.

This makes CEMEDINE CA-149 60 Minute Epoxy 110g particularly suitable for larger bonding areas, complicated assemblies and repair applications where precise positioning is important.

The adhesive cures through the chemical reaction of Component A and Component B and forms a hard, durable bond after curing.

Key Features and Advantages

60-Minute Working Time

The main advantage of CA-149 is its extended working period.

At approximately 23°C, curing begins about 60 minutes after mixing, providing more time for positioning and adjustment than fast-curing epoxy systems.

Strong Rigid Bonding

After curing, the adhesive forms a hard and durable bond suitable for rigid materials such as metal, ceramics and hard plastics.

Heat Resistance

CEMEDINE identifies the Super series as having excellent heat resistance, making it suitable for many general industrial and repair applications exposed to temperature changes.

Water Resistance

The cured epoxy provides good resistance to water and moisture, supporting reliable bonding in demanding conditions.

Chemical Resistance

The adhesive also provides good resistance to chemicals after proper curing, making it suitable for workshop, maintenance and industrial applications.

Large-Area Bonding

The longer working time gives users sufficient time to spread the adhesive evenly over relatively large bonding areas before curing begins.

Applications

Metal Bonding

CEMEDINE CA-149 60 Minute Epoxy 110g is suitable for bonding and repairing steel and other compatible metal components where a strong rigid joint is required.

Ceramic Bonding

The adhesive provides dependable bonding for ceramics and other rigid mineral-based materials.

Hard Plastic Bonding

Selected hard plastics can be bonded with CA-149. Compatibility should be confirmed with the actual substrate before production use.

Wood and General Repair

The product can also be used for selected wood, model-making, fishing equipment and general repair applications.

Selected Glass Applications

CEMEDINE lists glass among possible substrates, but large-area glass bonding should be approached cautiously because curing shrinkage may cause cracking.

Suitable Materials

Metal
Steel
Ceramic
Hard Plastic
Wood
Selected Glass Applications
Rigid Components

Not Suitable For

Polyethylene
Polypropylene
Nylon
Soft PVC
Fluororesin
Rubber

Application Method

Clean the bonding surfaces and remove dust, rust, oil and moisture.

Dispense equal volumes of Component A and Component B.

Mix thoroughly until uniform.

Apply the mixed adhesive evenly to the bonding surface.

Join and position the parts accurately.

Hold or clamp the bonded parts until sufficient strength develops.

Technical Information

Brand: CEMEDINE

Series: Super

Model: CA-149

JAN Code: 4901761100472

Product Type: Two-Part Epoxy Adhesive

Capacity: 110g Set

Mixing Ratio: 1:1 by Volume

Cure Start Time: Approx. 60 Minutes at 23°C

Main Component: Epoxy Resin

Key Properties:
Heat Resistance / Water Resistance / Chemical Resistance / Strong Rigid Bonding

Suitable Materials:
Metal / Ceramic / Hard Plastic / Wood / Selected Glass

Country of Origin: Japan

Why Choose CEMEDINE CA-149 60 Minute Epoxy 110g

CEMEDINE CA-149 60 Minute Epoxy 110g is a practical choice when users require the strength of a two-part epoxy together with more time for spreading, alignment and positioning.

Its extended working period makes it especially useful for larger bonded areas and detailed repair work.

The combination of strong rigid adhesion, heat resistance, water resistance and chemical resistance makes CA-149 suitable for metal, ceramic, hard plastic and other rigid-material applications.