CEMEDINE CA-186 5 Minute Epoxy is a fast-curing two-component epoxy adhesive designed for bonding and repairing rigid materials such as metal, ceramic and hard plastic. The 80g High Super 5 set provides rapid curing, strong rigid bonding and excellent resistance to heat, water and chemicals for repair, assembly and general bonding applications.

Table of Contents

Product Overview

CEMEDINE High Super 5 CA-186 is a two-part room-temperature curing epoxy adhesive supplied as an 80g set. It is designed for situations where a strong bond is required quickly and where the bonded materials are relatively hard and rigid.

The adhesive consists of a base resin and hardener that are mixed at a 1:1 ratio before application. The base resin is blue translucent and the hardener is light yellow translucent. As the two components are mixed correctly, the blue color disappears, providing a convenient visual guide for proper mixing.

CEMEDINE CA-186 5 Minute Epoxy begins curing approximately five minutes after mixing at 23°C. Practical handling strength is typically reached in about one hour, while the standard full curing condition is approximately 23°C for 24 hours.

Key Features and Advantages

Fast 5-Minute Curing

The High Super 5 formulation is developed for urgent bonding and repair work. Its working time is within approximately five minutes at 23°C, helping reduce waiting time compared with slower curing epoxy systems.

Strong Rigid Bond

After curing, the adhesive forms a hard and durable bond. It is particularly suitable for rigid substrates where a flexible adhesive is not required.

Excellent Heat Resistance

The cured epoxy provides good resistance to elevated temperatures, making it suitable for many repair and assembly applications involving changing operating temperatures.

Water and Chemical Resistance

CEMEDINE CA-186 5 Minute Epoxy offers excellent water resistance and good chemical resistance after curing. These characteristics help maintain bond reliability in demanding service environments.

Easy 1:1 Mixing

The base resin and hardener are mixed at an equal 1:1 ratio, simplifying preparation. The blue-colored base resin also acts as a useful mixing indicator because the color becomes less visible after thorough mixing.

Applications

Metal Bonding and Repair

CA-186 can be used for bonding and repairing various metal components. The rigid cured epoxy is suitable for small mechanical parts, models and general metal repair applications.

Ceramic Bonding

The adhesive provides strong bonding to ceramics and other rigid mineral-based materials, making it useful for repair and assembly work.

Hard Plastic Bonding

CEMEDINE CA-186 5 Minute Epoxy can bond many hard plastics where a rigid epoxy joint is appropriate. Compatibility should always be confirmed with the actual substrate before production use.

Model and Equipment Repair

The rapid curing characteristics make the product convenient for plastic models, metal models, fishing equipment and other small repair or fabrication tasks.

Gap Filling

Because epoxy adhesives cure through a chemical reaction, the material can also be useful for filling small gaps and uneven areas between bonded rigid surfaces.

Suitable Materials

Typical suitable substrates include:

Metal
Steel
Ceramic
Hard Plastic
Rigid Components
Selected Composite Materials

For flexible plastics, PE, PP, fluororesin and other difficult-to-bond materials, a specialized adhesive system should be considered.

Technical Information

Brand: CEMEDINE

Series: High Super 5

Model: CA-186

JAN Code: 4901761100571

Product Type: Two-Part Epoxy Adhesive

Capacity: 80g Set

Base Resin: Epoxy Resin

Hardener Type: Polyamide

Base Resin Appearance: Blue Translucent

Hardener Appearance: Light Yellow Translucent

Base Resin Viscosity: Approx. 125 Pa·s at 23°C

Hardener Viscosity: Approx. 65 Pa·s at 23°C

Base Resin Density: Approx. 1.17 g/cm³

Hardener Density: Approx. 1.15 g/cm³

Mixing Ratio: 1:1

Pot Life: Within Approx. 5 Minutes at 23°C

Practical Cure Time: Approx. 1 Hour at 23°C

Standard Cure: 23°C × 24 Hours

Tensile Shear Strength: Approx. 18.0 MPa

T-Peel Strength: Approx. 0.31 N/mm

Hardness: Shore D 77

Glass Transition Temperature: Approx. 47°C

Water Absorption: Approx. 2.5%

Volume Resistivity: Approx. 4.9 × 10¹³ Ω·cm

Why Choose CEMEDINE CA-186 5 Minute Epoxy

CEMEDINE CA-186 5 Minute Epoxy combines fast processing, simple 1:1 mixing and strong rigid bonding in an easy-to-use 80g package.

Its five-minute working time makes it particularly useful for urgent repair and small assembly applications, while its resistance to heat, water and chemicals provides dependable cured performance.

For metal, ceramic, hard plastic and other rigid material applications, CA-186 offers a practical balance of curing speed, strength and ease of use.