CEMEDINE 575F Contact Adhesive 180ml is a fast-drying chloroprene rubber solvent-based adhesive developed for professional bonding of rubber, metal, leather and hard plastic materials. The RK-126 180ml tube provides excellent initial adhesion and convenient contact-bonding performance for industrial assembly, repair and maintenance applications.

Table of Contents

Product Overview

CEMEDINE 575F RK-126 is a general-purpose industrial contact adhesive based on chloroprene rubber. It is designed for applications where rapid initial strength and reliable adhesion are required.

Unlike reactive epoxy or moisture-curing adhesives, 575F develops adhesion through solvent evaporation. For contact bonding, the adhesive is applied to both surfaces, allowed to dry for an appropriate open time, and then the two materials are pressed firmly together.

The recommended open time is approximately 5 to 30 minutes, depending on the substrate, coating amount, temperature and working conditions.

CEMEDINE 575F Contact Adhesive 180ml is particularly useful where components need good initial holding strength without long temporary fixation.

Key Features and Advantages

Fast-Drying Contact Adhesion

575F is designed for fast industrial bonding. The contact-bonding process allows strong initial adhesion to develop quickly after the coated surfaces are joined.

This helps reduce fixture time and can improve efficiency in assembly and repair operations.

Strong Initial Adhesion

CEMEDINE 575F Contact Adhesive 180ml provides excellent initial bond development, helping parts remain in position immediately after pressing.

This characteristic is useful for rubber parts, sheet materials, leather and other components that can be difficult to clamp for long periods.

Multi-Material Bonding

The adhesive is suitable for bonding rubber, metal, leather and many rigid plastic materials.

Its broad compatibility makes it a practical general-purpose adhesive for industrial manufacturing, maintenance workshops and equipment repair.

Flexible Bonding Performance

Because the adhesive is based on chloroprene rubber, the cured bond retains flexibility compared with rigid structural adhesives.

This makes it useful for materials and components that experience movement, vibration or bending during service.

Easy Tube Application

The RK-126 180ml tube is convenient for manual application, repair work and small production batches.

The adhesive can be spread with a brush or suitable applicator to achieve a uniform coating on both bonding surfaces.

Applications

Rubber to Metal Bonding

CEMEDINE 575F Contact Adhesive 180ml is suitable for bonding vulcanized rubber parts to metal components in industrial and maintenance applications.

Leather Bonding

The adhesive can be used for leather assembly and repair where strong initial adhesion and flexibility are required.

Hard Plastic Bonding

575F can bond selected rigid plastic materials. Compatibility should be confirmed with the actual plastic before production use.

Industrial Repair and Assembly

The product is useful for equipment repair, maintenance, panel assembly and general industrial bonding involving mixed materials.

Suitable Materials

Typical suitable materials include:

Rubber
Metal
Steel
Aluminum
Leather
Hard Plastic
Wood
Selected Sheet Materials

For PE, PP, fluororesin and other difficult-to-bond low-surface-energy plastics, a specialized adhesive system should be considered.

Application Method

1. Remove oil, dust, moisture and contamination from both bonding surfaces.

2. Apply a thin and uniform coat of adhesive to both surfaces.

3. Allow an open time of approximately 5 to 30 minutes until the surface becomes appropriately dry.

4. Carefully align the parts and press them together firmly.

5. Apply sufficient pressure across the bonded area to ensure good contact.

Because contact adhesive develops strong initial adhesion immediately after joining, repositioning may be difficult once the two coated surfaces touch.

Technical Information

Brand: CEMEDINE

Model: 575F

Product Code: RK-126

JAN Code: 4901761187299

Product Type: Solvent-Based Contact Adhesive

Adhesive Base: Chloroprene Rubber

Appearance: Light Yellow

Capacity: 180ml

Net Content by Mass: Approx. 153g

Application Method: Double-Sided Contact Bonding / Brush Application

Open Time: Approx. 5–30 Minutes

Non-Volatile Content: Approx. 29 wt%

Viscosity: Approx. 2,200 mPa·s at 23°C

Key Characteristics:
Fast Drying / Excellent Initial Adhesion / Flexible Bond / Multi-Purpose

Compliance:
JIS A 5549 / JAIA F☆☆☆☆ / 4VOC

Country of Origin: Japan

Why Choose CEMEDINE 575F Contact Adhesive 180ml

CEMEDINE 575F Contact Adhesive 180ml provides a practical combination of rapid initial adhesion, flexible bonding and broad material compatibility.

Its contact-bonding method helps eliminate lengthy temporary fixation, making it useful for production, maintenance and repair applications where working efficiency is important.

The RK-126 tube format is convenient for professional users who require controlled manual application without purchasing a large industrial container.

For rubber, metal, leather and hard plastic bonding, 575F is a versatile industrial adhesive solution with a long-established chloroprene rubber technology.