DOWSIL 732 Multi-Purpose Silicone Adhesive Sealant is a one-part acetoxy RTV silicone developed for dependable bonding, sealing, gasketing, and protective assembly work. Its ready-to-use, non-sag paste consistency allows controlled application on horizontal and vertical surfaces without mixing separate components. When exposed to moisture in the air, the material cures at room temperature into a tough, flexible silicone rubber that helps joints withstand vibration, moisture, temperature changes, and normal mechanical movement. This versatile performance makes it suitable for appliances, electrical equipment, metal fabrication, automotive components, industrial maintenance, and general product assembly.

Table of Contents

DOWSIL 732 Multi-Purpose Silicone Adhesive Sealant for Industrial Use

Industrial assemblies often require a sealant that can bond different materials while maintaining flexibility after cure. DOWSIL 732 Multi-Purpose Silicone Adhesive Sealant provides good adhesion to many properly prepared substrates and can be used to seal seams, attach components, form flexible gaskets, protect connections, and fill small irregular gaps. Its paste-like body stays in place after dispensing, helping operators create clean beads around housings, panels, flanges, fixtures, glass parts, and metal components.

The one-component format simplifies inventory and production because there is no mixing ratio, pot life, or special curing oven to manage. Operators can dispense the required amount directly from the package, tool the bead, assemble the parts, and allow atmospheric moisture to complete the cure. This straightforward process supports maintenance repairs, prototypes, small-batch assembly, and repeat manufacturing.

DOWSIL 732 Multi-Purpose Silicone Adhesive Sealant Key Benefits

DOWSIL 732 Multi-Purpose Silicone Adhesive Sealant remains stable and flexible from approximately -60°C to 180°C, with short exposure peaks up to about 205°C. The black version offers higher stated temperature capability, remaining flexible up to approximately 205°C with short peaks up to 230°C. These ranges make the sealant useful for equipment and assemblies exposed to cold conditions, operating heat, or repeated thermal cycling.

The cured silicone also provides excellent dielectric properties, supporting selected electrical insulation and component-protection applications. Typical published properties include Shore A hardness of approximately 25, elongation around 540%, specific gravity near 1.04 at 25°C, and tensile strength of about 333.6 psi. Actual performance depends on cure conditions, joint design, substrate, bead thickness, and service environment.

The product is available in clear, white, black, and aluminum colors, allowing buyers to match the sealant to different equipment finishes and inspection requirements. It complies with MIL-A-46106 and meets the requirements of 21 CFR 177.2600 for rubber articles intended for repeated use. Final users should confirm that their complete application, manufacturing process, and intended contact conditions meet all relevant regulatory requirements.

How to Apply DOWSIL 732 Multi-Purpose Silicone Adhesive Sealant

Clean all bonding surfaces before application. Remove dust, grease, oil, water, corrosion, release agents, and loose residues that may interfere with adhesion. Cut the nozzle to the required bead size, apply the sealant evenly, and assemble or tool the joint before a surface skin develops. At 50% relative humidity, the published tack-free time is approximately 20 minutes, although temperature, humidity, and bead thickness will influence actual results.

Allow sufficient airflow around the applied material because moisture is required for curing. Deep, enclosed, or very thick sections cure more slowly than thin exposed beads. Complete adhesion and compatibility testing before production, particularly on plastics, coatings, sensitive metals, and surfaces exposed to chemicals. Because the product uses an acetoxy cure system, it releases acetic acid during cure and should be used with adequate ventilation.

DOWSIL 732 Multi-Purpose Silicone Adhesive Sealant gives industrial buyers a practical combination of easy dispensing, flexible sealing, broad temperature performance, electrical insulation, and multi-purpose bonding. Its proven one-part RTV format makes it a reliable choice for manufacturers, maintenance teams, repair centers, and distributors seeking one silicone product for a wide range of everyday sealing and assembly requirements.

industrial silicone adhesives and sealants

dowsil-732-multi-purpose-silicone-adhesive-sealant